Wastewater Engineering Treatment And Resource Reco

Wastewater Engineering: Treatment and Resource Recovery, 5/e is a thorough update of McGraw-Hill's authoritative book on wastewater treatment. No environmental engineering professional or civil or environmental engineering major should be without a copy of this book - describing the rapidly evolving field of wastewater engineering technological and regulatory changes that have occurred over the last ten years in this discipline, including: a new view of a wastewater as a source of energy, nutrients and potable water; more stringent discharge requirements related to nitrogen and phosphorus; enhanced understanding of the fundamental microbiology and physiology of the microorganisms responsible for the removel of nitrogen and phosphorus and other constituents; an appreciation of the importance of the separate treatment of return flows with respect to meeting more stringent standards for nitrogen removal and opportunities for nutrient recovery; increased emphasis on the treatment of sludge and the management of biosolids; increased awareness of carbon footprints impacts and greenhouse gas emissions, and an emphasis on the development of energy neutral or energy positive wastewater plants through more efficient use of chemical and heat energy in wastewater. This revision contains a strong focus on advanced wastewater treatment technologies and stresses the reuse aspects of wastewater and biosolids.

This is a thorough update of an authoritative book on wastewater treatment. This text describes the rapidly evolving field of wastewater engineering technological and regulatory changes that have occurred over the last ten years in this discipline and it includes: a new view of a wastewater as a source of energy, nutrients and potable water; more stringent discharge requirements related to nitrogen and phosphorus; enhanced understanding of the fundamental microbiology and physiology of the microorganisms responsible for the removal of nitrogen and phosphorus and other constituents; an appreciation of the importance of the separate treatment of return flows with respect to meeting more stringent standards for nitrogen removal and opportunities for nutrient recovery; increased emphasis on the treatment of sludge and the management of biosolids; increased awareness of carbon footprints impacts and greenhouse gas emissions, and an emphasis on the development of energy neutral or energy positive wastewater plants through more efficient use of chemical and heat energy in wastewater. This revision contains a strong focus on advanced wastewater treatment technologies and stresses the reuse aspects of wastewater and biosolids.

This book introduces the 3R concept applied to wastewater treatment and resource recovery under a double perspective. Firstly, it deals with innovative technologies leading to: Reducing energy requirements, space and impacts; Reusing water and sludge of sufficient quality; and Recovering resources such as energy, nutrients, metals and chemicals, including biopolymers. Besides targeting effective C,N&P removal, other issues such as organic micropollutants, gases and odours emissions are considered. Most of the technologies analysed have been tested at pilot- or at full-scale. Tools and methods for their Economic, Environmental, Legal and Social impact assessment are described. The 3R concept is also applied to Innovative Processes design, considering different levels of innovation: Retrofitting, where novel units are included in more conventional processes; Re-Thinking, which implies a substantial flowsheet modification; and Re-Imagining, with completely new conceptions. Tools are presented for Modelling, Optimising and Selecting the most suitable plant layout for each particular scenario from a holistic technical, economic and environmental point of view.

The 2nd edition of Fundamentals of Wastewater Treatment and Design introduces readers to the fundamental concepts of wastewater treatment, followed by engineering design of unit processes for sustainable treatment of municipal wastewater and resource recovery. It has been completely updated with new chapters to reflect current advances in design, resource recovery practices and research. Another highlight is the addition of the last chapter, which provides a culminating design experience of both urban and rural wastewater treatment systems. Filling the need for a textbook focused on wastewater, it covers history, current practices, emerging concerns, future directions and pertinent regulations that have shaped the objectives of this important area of engineering. Basic principles of reaction kinetics, reactor design and environmental microbiology are introduced along with natural purification processes. It also details the design of unit processes for primary, secondary and advanced treatment, as well as solids processing and removal. Recovery of water, energy and nutrients are explained with the help of process concepts and design applications. This textbook is designed for undergraduate and graduate students who have some knowledge of environmental chemistry and fluid mechanics. Professionals in the wastewater industry will also find this a handy reference.

This informative volume provides comprehensive knowledge on various aspects of wastewater resource management from the point of process sustainability and resource recovery. This authoritative compendium is crucial for developing resource-efficient and sustainable wastewater treatment technologies and management strategies for both small (decentralized) and large (centralized) communities. Traditional wastewater systems have become increasingly energy-consuming and cost-intensive while also not meeting the increasing standards for nutrient removal and sustainable development. This book incorporates the latest developments in pollutant removal and resource recovery schemes in wastewater treatment. It highlights advances that have been made in microbiological processes; design of treatment methods; process configurations ; energy conservation and efficiency improvement schemes ; nutrient removal; recovery, reclamation, and recycling ; beneficial uses of wastewater ; and bioenergy and biochemical production from wastewater and sludge streams. Waste-to-energy technologies, especially wastewater treatment as a potential biofuel energy alternative through bioelectrochemical and other processes, are also discussed in this book. Basic and advanced principles of wastewater treatment are covered with theoretical development, illustrations, samples and examples, and case studies. Eminent scholars around the world have shared their knowledge here, making this volume a valuable resource for novice researchers as well as practicing and experienced professionals in biofuel research and industrial sectors. The scientific experimental methods and analytical procedures and interpretation of the results capture the state-of-the-art knowledge in the literature and future trends in this area

The principle of the conventional activated sludge (CAS) for municipal wastewater treatment is primarily based on biological oxidation by which organic matters are converted to biomass and carbon dioxide. After more than 100 years’ successful application, the CAS process is receiving increasing critiques on its high energy consumption and excessive sludge generation. Currently, almost all municipal wastewater treatment plants with the CAS as a core process are being operated in an energy-negative fashion. To tackle such challenging situations, there is a need to re-examine the present wastewater treatment philosophy by developing and adopting novel process configurations and emerging technologies. The solutions going forward should rely on the ways to improve direct energy recovery from wastewater, while minimizing in-plant energy consumption. This book begins with a critical overview of the energy situation and challenges in current municipal wastewater treatment plants, showing the necessity of the paradigm shift from removal to recovery in terms of energy and resource. As such, the concept of A-B process is discussed in detail in the book. It appears that various A-B process configurations are able to provide possible engineering solutions in which A-stage is primarily designed for COD capture with the aim for direct anaerobic treatment without producing excessive biosludge, while B-stage is designated for nitrogen removal. Making the wastewater treatment energy self-sustainable is obviously of global significance and eventually may become a game changer for the global market of the municipal wastewater reclamation technology. The principal audiences include practitioners, professionals, university researchers, undergraduate and postgraduate students who are interested and specialized in municipal wastewater treatment and process design, environmental engineering, and environmental biotechnology.

Biological treatment of wastewater is a low-cost solution for remediation of wastewater. This book focuses on the bioremediation of wastewater, its management, monitoring, role of biofilms on wastewater treatment and energy recovery. It emphasizes on organic, inorganic and micropollutants entering into the environment after conventional wastewater treatment facilities of industrial, agricultural and domestic wastewaters. The occurrence of persistent pollutants poses deleterious effects on human and environmental health. Simple solution for recovery of energy as well as water during biological treatment of wastewater is a viable option. This book provides necessary knowledge and experimental studies on emerging bioremediation processes for reducing water, air and soil pollution.

Sustainable Resource Management Learn how current technologies can be used to recover and reuse waste products to reduce environmental damage and pollution In this two-volume set, Sustainable Resource Management: Technologies for Recovery and Reuse of Energy and Waste Materials delivers a compelling argument for the importance of the widespread adoption of a holistic approach to enhanced water, energy, and waste management practices. Increased population and economic growth, urbanization, and industrialization have put sustained pressure on the world’s environment, and this book demonstrates how to use organics, nutrients, and thermal heat to better manage wastewater and solid waste to deal with that reality. The book discusses basic scientific principles and recent technological advances in current strategies for resource recovery from waste products. It also presents solutions to pressing problems associated with energy production during waste management and treatment, as well as the health impacts created by improper waste disposal and pollution. Finally, the book discusses the potential and feasibility of turning waste products into resources. Readers will also enjoy: A thorough introduction and overview to resource recovery and reuse for sustainable futures An exploration of hydrothermal liquefaction of food waste, including the technology’s use as a potential resource recovery strategy A treatment of resource recovery and recycling from livestock manure, including the current state of the technology and future prospects and challenges A discussion of the removal and recovery of nutrients using low-cost adsorbents from single-component and multi-component adsorption systems Perfect for water and environmental chemists, engineers, biotechnologists, and food chemists, Sustainable Resource Management also belongs on the bookshelves of environmental officers and consultants, chemists in private industry, and graduate students taking programs in environmental engineering, ecology, or other sustainability related fields.

Contemporary Municipal Wastewater Treatment Plant Design Methods Fully revised and updated, this three-volume set from the Water Environment Federation and the Environmental and Water Resources Institute of the American Society of Civil Engineers presents the current plant planning, configuration, and design practices of wastewater engineering professionals, augmented by performance information from operating facilities. Design of Municipal Wastewater Treatment Plants, Fifth Edition, includes design approaches that reflect the experience of more than 300 authors and reviewers from around the world. Coverage includes: Integrated facility design Sustainability and energy management Plant hydraulics and pumping Odor control and air emissions Thoroughly updated information on biofilm reactors Biological, physical, and chemical liquid treatment Membrane bioreactors, IFAS, and other integrated biological processes Nutrient removal Sidestream treatment Wastewater disinfection Solids minimization, treatment, and stabilization, including thermal processing Biosolids use and disposal

Throughout history, the first and foremost role of urban water management has been the protection human health and the local aquatic environment. To this end, the practice of (waste-)water treatment has maintained a central focus on the removal of pollutants through dissipative pathways. Approaches like – in case of wastewater treatment – the activated sludge process, which make ‘hazardous things’ disappear, have benefitted our society tremendously by safeguarding human and environmental health. While conventional (waste-)water treatment is regarded as one of the greatest engineering achievements of the 20th century, these dissipative approaches will not suffice in the 21th century as we enter the era of the circular economy. A key challenge for the future of urban water management is the need to re-envision the role of water infrastructure, still holding paramount the safeguard of human and environmental health while also becoming a more proactive force for sustainable development through the recovery of resources embedded in urban water. This book aims (i) to explain the basic principles governing resource recovery from water (how much is there, really); (ii) to provide comprehensive overview and critical assessment of the established and emerging technologies for resource recovery from water; and (iii) to put resource recovery from water in a legal, economic (including the economy of scale of recovered products), social (consumer’s point of view), and environmental sustainability framework. This book serves as a powerful teaching tool at the graduate entry master level with an aim to developing the next generation of engineers and experts and is also highly relevant for seasoned water professionals and practicing engineers.

Step-by-step procedures for planning, design, construction and operation: * Health and environment * Process improvements * Stormwater and combined sewer control and treatment * Effluent disposal and reuse * Biosolids disposal and reuse * On-site treatment and disposal of small flows * Wastewater treatment plants should be designed so that the effluent standards and reuse objectives, and biosolids regulations can be met with reasonable ease and cost. The design should incorporate flexibility for dealing with seasonal changes, as well as long-term changes in wastewater quality and future regulations. Good planning and design, therefore, must be based on five major steps: characterization of the raw wastewater quality and effluent, pre-design studies to develop alternative processes and selection of final process train, detailed design of the selected alternative, contraction, and operation and maintenance of the completed facility. Engineers, scientists, and financial analysts must utilize principles from a wide range of disciplines: engineering, chemistry, microbiology, geology, architecture, and economics to carry out the responsibilities of designing a wastewater treatment plant. The objective of this book is to present the technical and nontechnical issues that are most commonly addressed in the planning and design reports for wastewater treatment facilities prepared by practicing engineers. Topics discussed include facility planning, process description, process selection logic, mass balance calculations, design calculations, and concepts for equipment sizing. Theory, design, operation and maintenance, trouble shooting, equipment selection and specifications are integrated for each treatment process. Thus delineation of such information for use by students and practicing engineers is the main purpose of this book.

The book on Physico-Chemical Treatment of Wastewater and Resource Recovery provides an efficient and low-cost solution for remediation of wastewater. This book focuses on physico-chemical treatment via advanced oxidation process, adsorption, its management and recovery of valuable chemicals. It discusses treatment and recovery process for the range of pollutants including BTX, PCB, PCDDs, proteins, phenols, antibiotics, complex organic compounds and metals. The occurrence of persistent pollutants poses deleterious effects on human and environmental health. Simple solutions for recovery of valuable chemicals and water during physico-chemical treatment of wastewater are discussed extensively. This book provides necessary knowledge and experimental studies on emerging physico-chemical processes for reducing water pollution and resource recovery.

Tackling the issue of water and wastewater treatment nowadays requires novel approaches to ensure that sustainable development can be achieved. Water and wastewater treatment should not be seen only as an end-of-pipe solution but instead the approach should be more holistic and lead to a more sustainable process. This requires the integration of various methods/processes to obtain the most optimized design. Integrated and Hybrid Process Technology for Water and Wastewater Treatment discusses the state-of-the-art development in integrated and hybrid treatment processes and their applications to the treatment of a vast variety of water and wastewater sources. The approaches taken in this book are categorized as (i) resources recovery and consumption, (ii) optimal performance, (iii) physical and environmental footprints, (iv) zero liquid discharge concept and are (v) regulation-driven. Through these categories, readers will see how such an approach could benefit the water and wastewater industry. Each chapter discusses challenges and prospects of an integrated treatment process in achieving sustainable development. This book serves as a platform to provide ideas and to bridge the gap between laboratory-scale research and practical industry application. Includes comprehensive coverage on integrated and hybrid technology for water and wastewater treatment Takes a new approach in looking at how water and wastewater treatment contributes to sustainable development Provides future direction of research in sustainable water and wastewater treatment

Over 80% of globally produced wastewater receives little or no treatment before it is disposed into the environment. Therefore, it is urgent to develop new wastewater treatment technologies that are sustainable in the broad sense of the word, i.e. not only produce high quality effluents, but also minimise energy expenses, recover energy and nutrients, and apply technology that is appropriate in relation to the availability of skilled personnel. This book compiles the main outcomes of recent efforts to improve the design of waste stabilisation ponds, and confirms the superior performance of high rate algal ponds as a result of process intensification. Anaerobic digestion devoted to biogas production continues to be the preferred strategy for the energy valorisation of the algal biomass, co-digestion with multiple high C/N ratio substrates gathering significant attention over the past years. The potential of algal biomass as a biosorbent for heavy metal removal (Cu, Ni, F) maintains its share in the research field of water bioremediation, while research on nutrient removal has focused on providing new insights on the mechanism of nitrogen and phosphorus removal from wastewater in algal–bacterial systems. Finally, it is worth noticing that breakthroughs in complementary fields of research such as nanotechnology or lighting technology are gradually being implemented in algal biotechnology, with new products such as nanoparticles for water disinfection or photobioreactors illuminated by low intensity LED panels. In Focus – a book series that showcases the latest accomplishments in water research. Each book focuses on a specialist area with papers from top experts in the field. It aims to be a vehicle for in-depth understanding and inspire further conversations in the sector.

Complete Coverage of the State-of-the-Art in Water Resource Recovery Facility Design Featuring contributions from hundreds of wastewater engineering experts, this fully updated guide presents the latest in facility planning, configuration, and design. Design of Water Resource Recovery Facilities: WEF Manual of Practice No. 8 and ASCE Manuals and Reports on Engineering Practice No. 76, Sixth Edition, covers key technical advances in wastewater treatment, including •Advances with membrane bioreactors applications •Advancements within integrated fixed-film/activated sludge (IFAS) systems and moving-bed biological-reactors systems •Biotrickling filtration for odor control •Increased use of ballasted flocculation •Enhanced nutrient-control systems •Sidestream nutrient removal to reduce the loading on the main nutrient-removal process •Use and application of wireless instrumentation •Use and application of modeling wastewater treatment processes for the basis of design and evaluations of alternatives •Process design and disinfection practices to minimize generation of TTHMs and other organics monitored for potable water quality •Approaches to minimizing biosolids production and advances in biosolids handling, including effective thermal hydrolysis, and improvements in sludge thickening and dewatering technologies •Increasing goals toward energy neutrality and driving net zero •Trend toward resource recovery

Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. A Fully Updated, In-Depth Guide to Water and Wastewater Engineering Thoroughly revised to reflect the latest advances, procedures, and regulations, this authoritative resource contains comprehensive coverage of the design and construction of municipal water and wastewater facilities. Written by an environmental engineering expert and seasoned academic, Water and Wastewater Engineering: Design Principles and Practice, Second Edition, offers detailed explanations, practical strategies, and design techniques as well as hands-on safety protocols and operation and maintenance procedures. You will get cutting-edge information on water quality standards, corrosion control, piping materials, energy efficiency, direct and indirect potable reuse, and more. Coverage includes: • The design and construction processes • General water supply design considerations • Intake structures and wells • Chemical handling and storage • Coagulation and flocculation • Lime-soda and ion exchange softening • Reverse osmosis and nanofiltration • Sedimentation • Granular and membrane filtration • Disinfection and fluoridation • Removal of specific constituents • Water plant residuals management, process selection, and integration • Storage and distribution systems • Wastewater collection and treatment design considerations • Sanitary sewer design • Headworks and preliminary treatment • Primary treatment • Wastewater microbiology • Secondary treatment by suspended growth biological processes • Secondary treatment by attached growth and hybrid biological processes • Tertiary treatment • Advanced oxidation processes • Direct and indirect potable reuse

Clean Energy and Resource Recovery: Wastewater Treatment Plants as Bio-refineries, Volume 2, summarizes the fundamentals of various treatment modes applied to the recovery of energy and value-added products from wastewater treatment plants. The book addresses the production of biofuel, heat, and electricity, chemicals, feed, and other products from municipal wastewater, industrial wastewater, and sludge. It intends to provide the readers an account of up-to-date information on the recovery of biofuels and other value-added products using conventional and advanced technological developments. The book starts with identifying the key problems of the sectors and then provides solutions to them with step-by-step guidance on the implementation of processes and procedures. Titles compiled in this book further explore related issues like the safe disposal of leftovers, from a local to global scale. Finally, the book sheds light on how wastewater treatment facilities reduce stress on energy systems, decrease air and water pollution, build resiliency, and drive local economic activity. As a compliment to Volume 1: Biomass Waste Based Biorefineries, Clean Energy and Resource Recovery, Volume 2: Wastewater Treatment Plants as Bio-refineries is a comprehensive reference on all aspects of energy and resource recovery from wastewater. The book is going to be a handy reference tool for energy researchers, environmental scientists, and civil, chemical, and municipal engineers interested in waste-to-energy. Offers a comprehensive overview of the fundamental treatments and methods used in the recovery of energy and value-added products from wastewater Identifies solutions to key problems related to wastewater to energy/resource recovery through conventional and advanced technologies and explore the alternatives Provides step-by-step guidance on procedures and calculations from practical field data Includes successful case studies from both developing and developed countries

FOCUSING ON CONTAMINANT FATE AND TRANSPORT, DESIGN OF ENVIRONMENTAL-CONTROL SYSTEMS, AND REGULATORY CONSTRAINTS This textbook details the fundamental equations that describe the fate and transport of contaminantsin the water environment. The application of these fundamental equations to the design of environmental-control systems and methodologies for assessing the impact of contaminant discharges into rivers, lakes, wetlands, ground water, and oceans are all covered. Readers learn to assess how much waste can be safely assimilatedinto a water body by developing a solid understanding of the relationship between the type of pollutant discharged, the characteristics of the receiving water, and physical, chemical, and biological impacts. In cases of surface runoff from urban and agricultural watersheds, quantitative relationships between the quality of surface runoff and the characteristics of contaminant sources located within the watersheds are presented. Some of the text's distinguishing features include its emphasis on the engineering design of systems that control the fate and transport of contaminants in the water environment, the design of remediation systems, and regulatory constraints. Particular attention is given to use-attainability analyses and the estimation of total maximum daily loads, both of which are essential components of water-quality control in natural systems. Readers are provided with a thorough explanation of the complex set of laws and regulations governing water-quality control in the United States. Proven as an effective textbook in several offerings of the author's class "Water Quality Control in Natural Systems," the flow of the text is carefully structured to facilitate learning. Moreover, a number of practical pedagogical tools are offered: * Practical examples used throughout the text illustrate the effects of controlling the quality, quantity, timing, and distribution of contaminant discharges into the environment * End-of-chapter problems, and an accompanying solutions manual, help readers assess their grasp of each topic as they progress through the text * Several appendices with useful reference material are provided, including current U.S. Water Quality Standards * Detailed bibliography guides readers to additional resources to explore particular topics in greater depth With its emphasis on contaminant fate and transport and design of environmental-control systems, this text is ideal for upper-level undergraduates and graduate students in environmental and civil engineering programs.Environmental scientists and practicing environmental/civil engineers will also find the text relevant and useful.