Structural Elements For Architects And Builders De

Concise but comprehensive, Jonathan Ochshorn's Structural Elements for Architects and Builders explains how to design and analyze columns, beams, tension members and their connections. The material is organized into a single, self-sufficient volume, including all necessary data for the preliminary design and analysis of these structural elements in wood, steel, and reinforced concrete. Every chapter contains insights developed by the author and generally not found elsewhere. Appendices included at the end of each chapter contain numerous tables and graphs, based on material contained in industry publications, but reorganized and formatted especially for this text to improve clarity and simplicity, without sacrificing comprehensiveness. Procedures for design and analysis are based on the latest editions of the National Design Specification for Wood Construction (AF&PA and AWC), the Steel Construction Manual (AISC), Building Code Requirements for Structural Concrete (ACI), and Minimum Design Loads for Buildings and Other Structures (ASCE/SEI). This thoroughly revised and expanded second edition of Structural Elements includes an introduction to statics and strength of materials, an examination of loads, and new sections on material properties and construction systems within the chapters on wood, steel, and reinforced concrete design. This permits a more comprehensive overview of the various design and analysis procedures for each of the major structural materials used in modern buildings. Free structural calculators (search online for: Ochshorn calculators) have been created for many examples in the book, enabling architects and builders to quickly find preliminary answers to structural design questions commonly encountered in school or in practice.

Structures and Architecture – Bridging the Gap and Crossing Borders contains the lectures and papers presented at the Fourth International Conference on Structures and Architecture (ICSA2019) that was held in Lisbon, Portugal, in July 2019. It also contains a multimedia device with the full texts of the lectures presented at the conference, including the 5 keynote lectures, and almost 150 selected contributions. The contributions on creative and scientific aspects in the conception and construction of structures, on advanced technologies and on complex architectural and structural applications represent a fine blend of scientific, technical and practical novelties in both fields. ICSA2019 covered all major aspects of structures and architecture, including: building envelopes/façades; comprehension of complex forms; computer and experimental methods; futuristic structures; concrete and masonry structures; educating architects and structural engineers; emerging technologies; glass structures; innovative architectural and structural design; lightweight and membrane structures; special structures; steel and composite structures; structural design challenges; tall buildings; the borderline between architecture and structural engineering; the history of the relationship between architects and structural engineers; the tectonic of architectural solutions; the use of new materials; timber structures, among others. This set of book and multimedia device is intended for a global readership of researchers and practitioners, including architects, structural and construction engineers, builders and building consultants, constructors, material suppliers and product manufacturers, and other professionals involved in the design and realization of architectural, structural and infrastructural projects.

The fib has two major missions now. One is to work toward the publication of the Model Code 2020, and the other is to respond to the global movement toward carbon neutrality. While the former is steadily progressing toward completion, the latter will require significant efforts for generations to come. As we all know, cement, the primary material for concrete, is a sector that accounts for 8.5% of the world’s CO2 emissions. And the structural concrete that fib handles consume 60% of that. In other words, we need to know the reality that our structural concrete is emitting 5% of the world’s CO2. From now on, fib members, suppliers, designers, builders, owner’s engineers, and academic researchers will be asked how to solve this difficult problem. In general, most of the CO2 emissions in the life cycle of structural concrete come from the production stage of materials and the use stage after construction, i.e. A1 to A3 and B1 to B5 processes as defined in EN15978. Cement and steel sectors, which are the main materials for structural concrete, are expected to take various measures to achieve zero carbon in their respective sectors by 2050. Until then, we must deal with the transition with our low carbon technologies. Regarding the production stage, the fib has recently launched TG4.8 “Low carbon concrete”. And the latest low carbon technologies will be discussed there. On the other hand, in the use stage, there is very little data on the relationship between durability and intervention and maintenance so far. The data accumulation here is the work of the fib, a group of various experts on structural concrete. Through-life management using highly durable structures and precise monitoring will enable to realize minimum maintenance in the use stage and to minimize CO2 emissions. Furthermore, it is also possible to contribute to the reduction of CO2 emissions in the further stage after the first cycle by responding to the circular economy, that is, deconstruction (C), reuse, and recycle (D). However, the technology in this field is still in its infancy, and further research and development is expected in the future. As described above, structural concrete can be carbon neutral in all aspects of its conception, and it can make a significant contribution when it is realized. The fib will have to address these issues in the future. Of course, it will not be easy, and it will take time. However, if we do not continue our efforts as the only international academic society on structural concrete in the world to achieve carbon neutrality, the significance of our very existence may be questioned. Long before Portland cement was invented, Roman concrete, made of volcanic ash and other materials, was the ultimate low-carbon material, and is still in use 2’000 years later because of its non-reinforced structure and lack of deterioration factors. Reinforced concrete, which made it possible to apply concrete to structures other than arches and domes, is only 150 years old. Prestressed concrete is even younger, with only 80 years of history. Now that we think about it, we realize that Roman concrete, which is non-reinforced low carbon concrete, is one of the examples of problem solving that we are trying to achieve. We have new materials, such as coated reinforcement, FRP, and fiber reinforced concrete, which can be used in any structural form. To overcome this challenge with all our wisdom would be to live up to the feat the Romans accomplished 2’000 years ago. Realizing highly durable and elegant structures with low-carbon concrete is the key to meet the demands of the world in the future. I hope you will enjoy reading this AOS brochure showing the Outstanding Concrete Structures Awards at the fib 2022 Congress in Oslo. And I also hope you will find some clues for the challenges we are facing.

Architectural heritage is now recognised to be of great importance to the historical identity. In order to take care of the architectural heritage of a region, town or nation, now recognised as of great importance to their historical identify, we need to share experiences and knowledge regarding heritage preservation in many parts of the world.Covering advances in this field presented at the thirteenth in a series of now-biennial conferences that began in 1989, this book covers such topics as Heritage architecture and historical aspects; Learning from the past; Surveying and monitoring; Performance and maintenance; Structural restoration of metallic structures; Preservation and monitoring; Earth construction; Modern (19th/20th century) heritage; Maritime heritage; Heritage masonry buildings; Stone masonry walls; Wooden structures; Simulation and modelling; Material characterization; New technologies or materials; Corrosion and material Decay; Seismic vulnerability; Non-destructive techniques; Assessment and re-use of heritage buildings; Heritage and tourism; Social and economic aspects in heritage; Guidelines, codes and regulations for heritage.

Structures and Architecture. A Viable Urban Perspective? contains extended abstracts of the research papers and prototype submissions presented at the Fifth International Conference on Structures and Architecture (ICSA2022, Aalborg, Denmark, 6-8 July 2022). The book (578 pages) also includes a USB with the full texts of the papers (1448 pages). The contributions on creative and scientific aspects in the conception and construction of structures as architecture, and on the role of advanced digital-, industrial- and craft -based technologies in this matter represent a critical blend of scientific, technical, and practical novelties in both fields. Hence, as part of the proceedings series Structures and Architecture, the volume adds to a continuous exploration and development of the synergetic potentials of the fields of Structures and Architecture. With each volume further challenging the conditions, problems, and potentials related to the art, practice, and theory of teaching, researching, designing, and building structures as vehicles towards a viable architecture of the urban environment. The volumes of the series appear once every three years, in tandem with the conferences organized by the International Association of Structures and Architecture and are intended for a global readership of researchers, practitioners, and students, including architects, structural and construction engineers, builders and building consultants, constructors, material suppliers, planners, urban designers, anthropologists, economists, sociologists, artists, product manufacturers, and other professionals involved in the design and realization of architectural, structural, and infrastructural projects.

This book presents a sample of theoretical and practical advances in symmetry in multidisciplinary engineering applications. It covers several applications, such as mechanical analysis of tunnel lining, prediction methods for the ring damper used in gears, calibration methods for manipulators, design methods for wheel configurations of mobile robots, analysis of elastic plastic damaged zones, 3D printed corneal models, analysis of multibody system dynamic networks, structural elements in architecture, railway transportation, transportation of hazardous materials, cable-driven mechanisms, and image processing. The contributions included in this book describe the state-of-the-art advances in this field and demonstrate the possibilities of the study of symmetry in multidisciplinary applications in the field of engineering.

Megalithic monuments are among the most striking remains of the Neolithic period of northern and western Europe and are scattered across landscapes from Pomerania to Portugal. Antiquarians and archaeologists early recognized the family resemblance of the different groups of tombs, attributing them to maritime peoples moving along the western seaways. More recent research sees them rather as the product of established early farming communities in their individual regions. Yet the diversity of the tombs, their chronologies and their varied cultural contexts complicates any straightforward understanding of their origins and distribution. Megalithic Architectures provides new insight by focusing on the construction and design of European megalithic tombs – on the tomb as an architectural project. It shows how much is to be learned from detailed attention to the stages and the techniques through which tombs were built, modified and enlarged, and often intentionally dismantled or decommissioned. The large slabs that were employed, often unshaped, may suggest an opportunistic approach by the Neolithic builders, but this was clearly far from the case. Each building project was unique, and detailed study of individual sites exposes the way in which tombs were built as architectural, social and symbolic undertakings. Alongside the manner in which the materials were used, it reveals a store of knowledge that sometimes differed considerably from one structure to another, even between contemporary monuments within a single region. The volume brings together regional specialists from Scandinavia, Germany, Britain, France, Belgium and Iberia to offer a series of uniquely authoritative studies. Results of recent fieldwork are fully incorporated and much of the material is published here for the first time in English. It provides an invaluable overview of the current state of research on European megalithic tombs. Megalithic monuments are among the most striking remains of the Neolithic period of northern and western Europe and are scattered across landscapes from Pomerania to Portugal. Antiquarians and archaeologists early recognized the family resemblance of the different groups of tombs, attributing them to maritime peoples moving along the western seaways. More recent research sees them rather as the product of established early farming communities in their individual regions. Yet the diversity of the tombs, their chronologies and their varied cultural contexts complicates any straightforward understanding of their origins and distribution. Megalithic Architectures provides new insight by focusing on the construction and design of European megalithic tombs – on the tomb as an architectural project. It shows how much is to be learned from detailed attention to the stages and the techniques through which tombs were built, modified and enlarged, and often intentionally dismantled or decommissioned. The large slabs that were employed, often unshaped, may suggest an opportunistic approach by the Neolithic builders, but this was clearly far from the case. Each building project was unique, and detailed study of individual sites exposes the way in which tombs were built as architectural, social and symbolic undertakings. Alongside the manner in which the materials were used, it reveals a store of knowledge that sometimes differed considerably from one structure to another, even between contemporary monuments within a single region. The volume brings together regional specialists from Scandinavia, Germany, Britain, France, Belgium and Iberia to offer a series of uniquely authoritative studies. Results of recent fieldwork are fully incorporated and much of the material is published here for the first time in English. It provides an invaluable overview of the current state of research on European megalithic tombs. Megalithic monuments are among the most striking remains of the Neolithic period of northern and western Europe and are scattered across landscapes from Pomerania to Portugal. Antiquarians and archaeologists early recognized the family resemblance of the different groups of tombs, attributing them to maritime peoples moving along the western seaways. More recent research sees them rather as the product of established early farming communities in their individual regions. Yet the diversity of the tombs, their chronologies and their varied cultural contexts complicates any straightforward understanding of their origins and distribution. Megalithic Architectures provides new insight by focusing on the construction and design of European megalithic tombs – on the tomb as an architectural project. It shows how much is to be learned from detailed attention to the stages and the techniques through which tombs were built, modified and enlarged, and often intentionally dismantled or decommissioned. The large slabs that were employed, often unshaped, may suggest an opportunistic approach by the Neolithic builders, but this was clearly far from the case. Each building project was unique, and detailed study of individual sites exposes the way in which tombs were built as architectural, social and symbolic undertakings. Alongside the manner in which the materials were used, it reveals a store of knowledge that sometimes differed considerably from one structure to another, even between contemporary monuments within a single region. The volume brings together regional specialists from Scandinavia, Germany, Britain, France, Belgium and Iberia to offer a series of uniquely authoritative studies. Results of recent fieldwork are fully incorporated and much of the material is published here for the first time in English. It provides an invaluable overview of the current state of research on European megalithic tombs. Megalithic monuments are among the most striking remains of the Neolithic period of northern and western Europe and are scattered across landscapes from Pomerania to Portugal. Antiquarians and archaeologists early recognized the family resemblance of the different groups of tombs, attributing them to maritime peoples moving along the western seaways. More recent research sees them rather as the product of established early farming communities in their individual regions. Yet the diversity of the tombs, their chronologies and their varied cultural contexts complicates any straightforward understanding of their origins and distribution. Megalithic Architectures provides new insight by focusing on the construction and design of European megalithic tombs – on the tomb as an architectural project. It shows how much is to be learned from detailed attention to the stages and the techniques through which tombs were built, modified and enlarged, and often intentionally dismantled or decommissioned. The large slabs that were employed, often unshaped, may suggest an opportunistic approach by the Neolithic builders, but this was clearly far from the case. Each building project was unique, and detailed study of individual sites exposes the way in which tombs were built as architectural, social and symbolic undertakings. Alongside the manner in which the materials were used, it reveals a store of knowledge that sometimes differed considerably from one structure to another, even between contemporary monuments within a single region. The volume brings together regional specialists from Scandinavia, Germany, Britain, France, Belgium and Iberia to offer a series of uniquely authoritative studies. Results of recent fieldwork are fully incorporated and much of the material is published here for the first time in English. It provides an invaluable overview of the current state of research on European megalithic tombs. Megalithic monuments are among the most striking remains of the Neolithic period of northern and western Europe and are scattered across landscapes from Pomerania to Portugal. Antiquarians and archaeologists early recognized the family resemblance of the different groups of tombs, attributing them to maritime peoples moving along the western seaways. More recent research sees them rather as the product of established early farming communities in their individual regions. Yet the diversity of the tombs, their chronologies and their varied cultural contexts complicates any straightforward understanding of their origins and distribution. Megalithic Architectures provides new insight by focusing on the construction and design of European megalithic tombs – on the tomb as an architectural project. It shows how much is to be learned from detailed attention to the stages and the techniques through which tombs were built, modified and enlarged, and often intentionally dismantled or decommissioned. The large slabs that were employed, often unshaped, may suggest an opportunistic approach by the Neolithic builders, but this was clearly far from the case. Each building project was unique, and detailed study of individual sites exposes the way in which tombs were built as architectural, social and symbolic undertakings. Alongside the manner in which the materials were used, it reveals a store of knowledge that sometimes differed considerably from one structure to another, even between contemporary monuments within a single region. The volume brings together regional specialists from Scandinavia, Germany, Britain, France, Belgium and Iberia to offer a series of uniquely authoritative studies. Results of recent fieldwork are fully incorporated and much of the material is published here for the first time in English. It provides an invaluable overview of the current state of research on European megalithic tombs.

"A pioneering account of mid-Atlantic folk architecture and of the nineteenth-century transformation of traditional agriculture. . . . A major study of American vernacular architecture."--Dell Upton, University of California, Berkeley "Bernard L. Herman has provided us with a model study in the interdisciplinary interpretation of a common landscape."--Robert Blair St. George, Journal of American Folklore "An impressive study that adds an important dimension to our understanding of the built environment."--Clifford E. Clark Jr., American Historical Review "A wide range of reader expectations will be met by this book. Herman provides a focused community study as well as an interpretation of vernacular architecture in the Mid-Atlantic region."--John Michael Vlach, Journal of the Society of Architectural Historians "Scholars will be impressed by Herman's ability to marshal different kinds of evidence to buttress his contention that architecture reveals not just how people materially ordered their lives but helped 'to create and maintain order, to project images of self and community, and to control meaning in social discourse.'"--Choice The Author: Bernard L. Herman teaches at the University of Delaware, where is a professor of art history and senior research fellow at the Center for Historic Architecture and Design. Among his many publications are Everyday Architecture of the Mid-Atlantic: Looking at Buildings and Landscapes (co-author with Gabrielle M. Lanier) and Historical Architectural and the Study of American Culture (co-editor with Lu Ann De Cunzo).

A leading Israeli archaeologist surveys the architecture and urban design of Herod the Great, one of the most famous builders of the biblical world.

The book aims to provide an overview of the state of the art on the mechanics of arches and masonry structures. It is addressed to an international audience, arising from the international context in which the Associazione Edoardo Benvenuto has carried out its activities in recent years, under the honorary presidency of Jacques Heyman. The book belongs to the collection Between Mechanics and Architecture, born in 1995 from the collaboration of several renowned scholars, including Edoardo Benvenuto (P. Radelet-de Grave, E. Benvenuto (eds.), Entre Mécanique et Architecture / Between Mechanics and Architecture, Birkhäuser, Basel 1995).

Sustainability is a concept that has monopolised a large number of the scientific debates in a wide range of spheres connected not only with architecture, urban planning and construction, but also with the product market, tourism, culture, etc. However, sustainability is indissolubly linked to vernacular architecture and the lessons this architectu

Local communities have adapted for centuries to challenging surroundings, resulting from unforeseen natural hazards. Vernacular architecture often reveals very intelligent responses attuned to the environment. Therefore, the question that emerged was: how did local populations prepare their dwellings to face frequent earthquakes? It was to respond to this gap in knowledge, that the SEISMIC-V research project was instigated, and this interdisciplinary international publication was prepared. The research revealed the existence of a local seismic culture, in terms of reactive or preventive seismic resistant measures, able to survive, if properly maintained, in areas with frequent earthquakes. The fundamental contribution and aims of the publication were to enhance: -The disciplinary interest in vernacular architecture; -Its contribution to risk mitigation in responding to natural hazards; -To encourage academic and scientific research collaboration among different disciplines; -To contribute to the improvement of vernacular dwellings, which half of the world’s population still inhabits nowadays. Fifty international researchers and experts presented case studies from Latin America, the Mediterranean, Eastern and Central Asia and the Himalayas region, with reference to 20 countries, i.e. Algeria, Bolivia, Bhutan, Chile, China, Egypt, El Salvador, Greece, Haiti, Italy, Japan, Mexico, Morocco, Nepal, Nicaragua, Peru, Romania, Taiwan, Turkey and a closer detailed analysis of Portugal. This publication brings together 43 contributions, with new perspectives on seismic retrofitting techniques and relevant data, addressing vernacular architecture; an amazing source of knowledge, and to this day, home to 4 billion people.

History of Construction Cultures Volume 1 contains papers presented at the 7ICCH – Seventh International Congress on Construction History, held at the Lisbon School of Architecture, Portugal, from 12 to 16 July, 2021. The conference has been organized by the Lisbon School of Architecture (FAUL), NOVA School of Social Sciences and Humanities, the Portuguese Society for Construction History Studies and the University of the Azores. The contributions cover the wide interdisciplinary spectrum of Construction History and consist on the most recent advances in theory and practical case studies analysis, following themes such as: - epistemological issues; - building actors; - building materials; - building machines, tools and equipment; - construction processes; - building services and techniques ; -structural theory and analysis ; - political, social and economic aspects; - knowledge transfer and cultural translation of construction cultures. Furthermore, papers presented at thematic sessions aim at covering important problematics, historical periods and different regions of the globe, opening new directions for Construction History research. We are what we build and how we build; thus, the study of Construction History is now more than ever at the centre of current debates as to the shape of a sustainable future for humankind. Therefore, History of Construction Cultures is a critical and indispensable work to expand our understanding of the ways in which everyday building activities have been perceived and experienced in different cultures, from ancient times to our century and all over the world.

Although Architecture and Structural Engineering have both had their own historical development, their interaction has led to many fascinating and delightful structures over time. To bring this interaction to a higher level, there is the need to stimulate the inventive and creative design of architectural structures and to persuade architects and structural engineers to work together in this process, exploiting constructive principles and aesthetic and static values. Structures and architecture presents over 250 selected contributions and addresses all major aspects of structures and architecture, including comprehension of complex forms, computer and experimental methods, concrete and masonry structures, emerging technologies, glass structures, innovative architectural and structural design, lightweight and membrane structures, special structures, steel and composite structures, the borderline between architecture and structural engineering, the tectonic of new solutions, the use of new materials, timber structures, the history of the relationship between architects and structural engineers, among others. This book of abstracts and the searchable CD-ROM with full papers contain the contributions presented at the 1st International Conference on Structures and Architecture (ICSA2010). This event was organized by the School of Architecture of the University of Minho, Guimarães, Portugal (July 2010), to promote the synergy between both disciplines. The contributions on creative and scientific aspects in the conception and construction of structures, on advanced technologies and on complex architectural and structural applications represent a fine blend of scientific, technical and practical novelties in both fields. This set is intended for both researchers and practitioners, including architects, structural and construction engineers, builders and building consultants, constructors, material suppliers, product manufacturers and other experts and professionals involved in the design and realization of architectural, structural and infrastructural projects.

Although the disciplines of architecture and structural engineering have both experienced their own historical development, their interaction has resulted in many fascinating and delightful structures. To take this interaction to a higher level, there is a need to stimulate the inventive and creative design of architectural structures and to persua

This book contains 24 technical papers presented at the fourth edition of the Advances in Architectural Geometry conference, AAG 2014, held in London, England, September 2014. It offers engineers, mathematicians, designers, and contractors insight into the efficient design, analysis, and manufacture of complex shapes, which will help open up new horizons for architecture. The book examines geometric aspects involved in architectural design, ranging from initial conception to final fabrication. It focuses on four key topics: applied geometry, architecture, computational design, and also practice in the form of case studies. In addition, the book also features algorithms, proposed implementation, experimental results, and illustrations. Overall, the book presents both theoretical and practical work linked to new geometrical developments in architecture. It gathers the diverse components of the contemporary architectural tendencies that push the building envelope towards free form in order to respond to multiple current design challenges. With its introduction of novel computational algorithms and tools, this book will prove an ideal resource to both newcomers to the field as well as advanced practitioners.

Although the disciplines of architecture and structural engineering have both experienced their own historical development, their interaction has resulted in many fascinating and delightful structures. To take this interaction to a higher level, there is a need to stimulate the inventive and creative design of architectural structures and to persuade architects and structural engineers to further collaborate in this process, exploiting together new concepts, applications and challenges. This set of book of abstracts and full paper searchable CD-ROM presents selected papers presented at the 3rd International Conference on Structures and Architecture Conference (ICSA2016), organized by the School of Architecture of the University of Minho, Guimarães, Portugal (July 2016), to promote the synergy in the collaboration between the disciplines of architecture and structural engineering.

"Swiss architectural firm Brodbeck & Roulet was established in 1978 and is now recognised as one of Europe's leading architectural ateliers. Brodbeck & Roulet projects range from administration and industry buildings to urban development and public transport, from housing developments and residentials to prominent public buildings and sites. The principal architects are Rino Brodbeck and Jacques Roulet."--Provided by publisher.

Over the last 15 years AZC’s architectural work has developed through a diverse range of experiences. This book, Time for Play, presents exhibition pavilions, temporary installations, and ideas competitions – a mix of built and un-built projects. “...Today’s situation promotes innovation, supports creativity and enriches projects, calling on our intelligence. We are forced to take a new look at practices and uses, to consider different ways of doing things, to think about the humanity of a place; and all this when we still find it so hard to understand community needs, and even more so to keep up with changing society.” And this is the position taken by AZC architects. Faced with a changing world, they propose solutions that are novel in their shape, use, cost and temporality.