Minimum Design Loads for Buildings and Other Structures

Minimum Design Loads for Buildings and Other Structures
  • Author : American Society of Civil Engineers
  • Publisher : Amer Society of Civil Engineers
  • Pages : 352
  • Relase : 2000
  • ISBN : 0784404887

Minimum Design Loads for Buildings and Other Structures Book Review:

Minimum Design Loads and Associated Criteria for Buildings ...

Minimum Design Loads and Associated Criteria for Buildings ...
  • Author : Anonim
  • Publisher :
  • Pages :
  • Relase :
  • ISBN :

Minimum Design Loads and Associated Criteria for Buildings ... Book Review:

Minimum Design Loads for Buildings and Other Structures

Minimum Design Loads for Buildings and Other Structures
  • Author : American Society of Civil Engineers
  • Publisher : Amer Society of Civil Engineers
  • Pages : 593
  • Relase : 2013
  • ISBN : 078441291X

Minimum Design Loads for Buildings and Other Structures Book Review:

Third Printing, incorporating errata, Supplement 1, and expanded commentary, 2013.

PE Civil Reference Manual

PE Civil Reference Manual
  • Author : Michael R. Lindeburg
  • Publisher : Professional Publications Incorporated
  • Pages : 1728
  • Relase : 2018-04-23
  • ISBN : 1591265703

PE Civil Reference Manual Book Review:

NEW EDITION *Add the convenience of accessing this book anytime, anywhere on your personal device with the eTextbook version for only $50 at ppi2pass.com/etextbook-program.* The PE Civil Reference Manual, formerly known as Civil Engineering Reference Manual for the PE Exam is the most comprehensive textbook for the NCEES PE Civil exam. This book's time-tested organization and clear explanations start with the basics to help you get up to speed with common civil engineering concepts. Together, the 90 chapters provide an in-depth review of all of the topics, codes, and standards listed in the NCEES PE Civil exam specifications. The extensive index contains thousands of entries, with multiple entries included for each topic, so you can easily find the codes and concepts you will need during the exam. This book features: over 100 appendices containing essential support material over 500 clarifying examples over 550 common civil engineering terms defined in an easy-to-use glossary thousands of equations, figures, and tables industry-standard terminology and nomenclature equal support of U.S. customary and SI units After you pass your exam, the PE Civil Reference Manual will continue to serve as an invaluable reference throughout your civil engineering career. Topics Covered Civil Breadth Project Planning; Means and Methods; Soil Mechanics; Structural Mechanics; Hydraulics and Hydrology; Geometrics; Materials; Site Development * Construction Earthwork Construction and Layout; Estimating Quantities and Costs; Construction Operations and Methods; Scheduling; Material Quality Control and Production; Temporary Structures; Health and Safety * Geotechnical Site Characterization; Soil Mechanics, Laboratory Testing, and Analysis; Field Materials Testing, Methods, and Safety; Earthquake Engineering and Dynamic Loads; Earth Structures; Groundwater and Seepage; Problematic Soil and Rock Conditions; Earth Retaining Structures; Shallow Foundations; Deep Foundations * Structural Analysis of Structures; Design and Details of Structures; Codes and Construction * Transportation Traffic Engineering; Horizontal Design; Vertical Design; Intersection Geometry; Roadside and Cross-Section Design; Signal Design; Traffic Control Design; Geotechnical and Pavement; Drainage; Alternatives Analysis * Water Resources and Environmental Analysis and Design; Hydraulics-Closed Conduit; Hydraulics-Open Channel; Hydrology; Groundwater and Wells; Wastewater Collection and Treatment; Water Quality; Drinking Water Distribution and Treatment; Engineering Economic Analysis

Development of a Probability Based Load Criterion for American National Standard A58

Development of a Probability Based Load Criterion for American National Standard A58
  • Author : United States. National Bureau of Standards
  • Publisher :
  • Pages : 222
  • Relase : 1980
  • ISBN : UCR:31210025450170

Development of a Probability Based Load Criterion for American National Standard A58 Book Review:

Design Loads on Structures During Construction

Design Loads on Structures During Construction
  • Author : Anonim
  • Publisher :
  • Pages : 37
  • Relase : 2015-02
  • ISBN : 0784413096

Design Loads on Structures During Construction Book Review:

Prepared by the Design Loads on Structures during Construction Standards Committee of the Codes and Standards Activities Division of the Structural Engineering Institute of ASCE Design loads during construction must account for the often short duration of loading and for the variability of temporary loads. Many elements of the completed structure that provide strength, stiffness, stability, or continuity may not be present during construction. Design Loads on Structures during Construction, ASCE/SEI 37-14, describes the minimum design requirements for construction loads, load combinations, and load factors affecting buildings and other structures that are under construction. It addresses partially completed structures as well as temporary support and access structures used during construction. The loads specified are suitable for use either with strength design criteria, such as ultimate strength design (USD) and load and resistance factor design (LRFD), or with allowable stress design (ASD) criteria. The loads are applicable to all conventional construction methods. Topics include: load factors and load combinations; dead and live loads; construction loads; lateral earth pressure; and environmental loads. Of particular note, the environmental load provisions have been aligned with those of Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10. Because ASCE/SEI 7-10 does not address loads during construction, the environmental loads in this standard were adjusted for the duration of the construction period. This new edition of Standard 37 prescribes loads based on probabilistic analysis, observation of construction practices, and expert opinions. Embracing comments, recommendations, and experiences that have evolved since the original 2002 edition, this standard serves structural engineers, construction engineers, design professionals, code officials, and building owners.

Design of Buildings for Wind

Design of Buildings for Wind
  • Author : Emil Simiu
  • Publisher : John Wiley & Sons
  • Pages : 352
  • Relase : 2011-09-23
  • ISBN : 9781118077375

Design of Buildings for Wind Book Review:

ASCE 7 is the US standard for identifying minimum design loads for buildings and other structures. ASCE 7 covers many load types, of which wind is one. The purpose of this book is to provide structural and architectural engineers with the practical state-of-the-art knowledge and tools needed for designing and retrofitting buildings for wind loads. The book will also cover wind-induced loss estimation. This new edition include a guide to the thoroughly revised, 2010 version of the ASCE 7 Standard provisions for wind loads; incorporate major advances achieved in recent years in the design of tall buildings for wind; present material on retrofitting and loss estimation; and improve the presentation of the material to increase its usefulness to structural engineers. Key features: New focus on tall buildings helps make the analysis and design guidance easier and less complex. Covers the new simplified design methods of ASCE 7-10, guiding designers to clearly understand the spirit and letter of the provisions and use the design methods with confidence and ease. Includes new coverage of retrofitting for wind load resistance and loss estimation from hurricane winds. Thoroughly revised and updated to conform with current practice and research.

American Standard Building Code Requirements for Minimum Design Loads in Buildings and Other Structures

American Standard Building Code Requirements for Minimum Design Loads in Buildings and Other Structures
  • Author : American Standards Association. Sectional committee on building code requirements for minimum design loads in buildings. A58
  • Publisher :
  • Pages : 32
  • Relase : 1945
  • ISBN : UOM:39015086487793

American Standard Building Code Requirements for Minimum Design Loads in Buildings and Other Structures Book Review:

Wind Loads for Petrochemical and Other Industrial Facilities

Wind Loads for Petrochemical and Other Industrial Facilities
  • Author : American Society of Civil Engineers. Task Committee on Wind Induced Forces
  • Publisher : Amer Society of Civil Engineers
  • Pages : 168
  • Relase : 2011
  • ISBN : 0784411808

Wind Loads for Petrochemical and Other Industrial Facilities Book Review:

This report provides state-of-the-practice guidelines for the computation of wind-induced forces on industrial facilities with structural features outside the scope of current codes and standards.

International Building Code 2018

International Building Code 2018
  • Author : International Code Council
  • Publisher :
  • Pages : 0
  • Relase : 2017
  • ISBN : 1609837355

International Building Code 2018 Book Review:

This code applies to all buildings except detached one- and two-family dwellings and townhouses up to three stories. The 2018 IBC contains many important changes such as: Accessory storage spaces of any size are now permitted to be classified as part of the occupancy to which they are accessory. New code sections have been introduced addressing medical gas systems and higher education laboratories. Use of fire walls to create separate buildings is now limited to only the determination of permissible types of construction based on allowable building area and height. Where an elevator hoistway door opens into a fire-resistance-rated corridor, the opening must be protected in a manner to address smoke intrusion into the hoistway. The occupant load factor for business uses has been revised to one occupant per 150 square feet. Live loads on decks and balconies increase the deck live load to one and one-half times the live load of the area served. The minimum lateral load that fire walls are required to resist is five pounds per square foot. Wind speed maps updated, including maps for the state of Hawaii. Terminology describing wind speeds has changed again with ultimate design wind speeds now called basic design wind speeds. Site soil coefficients now correspond to the newest generation of ground motion attenuation equations (seismic values). Five-foot tall wood trusses requiring permanent bracing must have a periodic special inspection to verify that the required bracing has been installed. New alternative fastener schedule for construction of mechanically laminated decking is added giving equivalent power-driven fasteners for the 20-penny nail. Solid sawn lumber header and girder spans for the exterior bearing walls reduce span lengths to allow #2 Southern Pine design values.

Wind Tunnel Testing for Buildings and Other Structures

Wind Tunnel Testing for Buildings and Other Structures
  • Author : American Society of Civil Engineers
  • Publisher :
  • Pages : 66
  • Relase : 2021-09-24
  • ISBN : 0784415749

Wind Tunnel Testing for Buildings and Other Structures Book Review:

ASCE/SEI 49-21 provides the minimum requirements for conducting and interpreting wind tunnel tests to determine wind loads on buildings and other structures.

Wind Loads: Time Saving Methods Using the 2018 IBC and ASCE/SEI 7-16

Wind Loads: Time Saving Methods Using the 2018 IBC and ASCE/SEI 7-16
  • Author : David A. Fanella
  • Publisher : McGraw-Hill Education
  • Pages : 256
  • Relase : 2020-12-25
  • ISBN : 1260467422

Wind Loads: Time Saving Methods Using the 2018 IBC and ASCE/SEI 7-16 Book Review:

Concise, visual explanations of code provisions that apply to wind loads This practical guide provides engineers with a visual overview of the code provisions pertinent to wind loads. Free of complicated and confusing explanations, the book includes numerous design aids, figures, and flowcharts that clearly demonstrate the code provisions. Written by a recognized expert in the field, Wind Loads: Time-Saving Methods Using the 2018 IBC and ASCE/SEI 7-16 contains simplified, step-by-step procedures that can be applied to main wind force resisting systems and components and cladding of building and nonbuilding structures. Examples and companion online Excel spreadsheets can be used to accurately and efficiently calculate wind loads. Coverage includes wind load requirements for: Wind velocity pressure Gust effects on rigid and flexible buildings and other structures Main wind force resisting systems of buildings and other structures Components and cladding of buildings and other structures Enclosed, partially enclosed, partially open, and open buildings of all heights Low-rise buildings Roof overhangs and parapets Building appurtenances and other structures Solid freestanding walls and signs Chimneys, tanks, open signs, single-plane open frames, and trussed towers Rooftop structures and equipment Circular bins, silos, and tanks Rooftop solar panels

Snow Loads

Snow Loads
  • Author : Michael J. O'Rourke
  • Publisher : Amer Society of Civil Engineers
  • Pages : 164
  • Relase : 2010
  • ISBN : 0784411115

Snow Loads Book Review:

Significant Changes to Seismic Load Provisions of ASCE 7-10: An Illustrated Guide focuses on the revisions to the seismic load requirements set forth in the latest edition of the Standard for minimum design loads. Mirroring the organization of the seismic chapters in ASCE 7-10, this handy reference briefly summarizes each change to the seismic provisions that might affect actual practice or enforcement and immediately follows up with the precise wording of the change. The impact of each update is explained in clear, straightforward language accompanied by diagrams, examples, and color photographs and illustrations to enrich the reader s understanding. Significant Changes to the Seismic Load Provisions of ASCE 7-10: An Illustrated Guide translates the changes to the seismic provisions of ASCE Standard 7-10 into a form readily accessible by structural engineers, architects, contractors, building officials and inspectors, and allied professionals. S. K. Ghosh is president, Susan Dowty is vice president and Prabuddha Dasgupta is engineering manager of S. K. Ghosh Associates Inc., a seismic and building code consulting firm based in Palatine, IL and Aliso Viejo, CA. All three are active in development and interpretation of U.S. codes and standards.

2015 International Building Code

2015 International Building Code
  • Author : International Code Council
  • Publisher :
  • Pages : 700
  • Relase : 2014-06-12
  • ISBN : 1609834674

2015 International Building Code Book Review:

Offers the latest regulations on designing and installing commercial and residential buildings.

2012 International Building Code

2012 International Building Code
  • Author : International Code Council
  • Publisher :
  • Pages : 690
  • Relase : 2011-06-03
  • ISBN : 1609830407

2012 International Building Code Book Review:

Offers the latest regulations on designing and installing commercial and residential buildings.

Seismic Loads

Seismic Loads
  • Author : Finley Allan Charney
  • Publisher :
  • Pages : 227
  • Relase : 2015
  • ISBN : 0784413525

Seismic Loads Book Review:

Finley Charney provides clear, authoritative explanations of the seismic design provisions contained in Minimum Design Loads for Buildings and Other Structures, Standard ASCE/SEI 7-10.

Wind Loads

Wind Loads
  • Author : William L Coulbourne,T. Eric Stafford
  • Publisher :
  • Pages : 180
  • Relase : 2020
  • ISBN : 0784415269

Wind Loads Book Review:

Authors Coulbourne and Stafford provide a comprehensive overview of the wind load provisions in Minimum Design Loads and Associated Criteria for Buildings and Other Structures, ASCE/SEI 7-16, focusing on the provisions that affect the planning, design, and construction of buildings for residential and commercial purposes.

Structural Load Determination: 2018 and 2021 IBC and ASCE/SEI 7-16

Structural Load Determination: 2018 and 2021 IBC and ASCE/SEI 7-16
  • Author : David Fanella
  • Publisher : McGraw Hill Professional
  • Pages : 512
  • Relase : 2018-09-07
  • ISBN : 9781260135633

Structural Load Determination: 2018 and 2021 IBC and ASCE/SEI 7-16 Book Review:

Calculate structural loads in compliance with the 2018 IBC® and ASCE/SEI 7-16This practical guide shows, step by step, how to interpret and apply the load provisions contained in the 2018 IBC® and ASCE/SEI 7-16. You will learn how to accurately determine structural loads including dead loads, live loads, and environmental loads. Throughout the book, detailed design examples, unique flowcharts, and design aids illustrate the proper usage of the code within the scope of everyday practice. Coverage includes:•Structural load fundamentals•IBC® and ASCE 7 explanations•Load combinations•Dead, live, rain, and soil lateral loads•Snow and ice loads•Wind loads•Earthquake loads•Flood and tsunami loads•Load paths

National Bureau of Standards Miscellaneous Publication

National Bureau of Standards Miscellaneous Publication
  • Author : Anonim
  • Publisher :
  • Pages : 284
  • Relase : 1945
  • ISBN : UCAL:B3102387

National Bureau of Standards Miscellaneous Publication Book Review:

Guide to the Use of Wind Load Provisions of ASCE 7-98

Guide to the Use of Wind Load Provisions of ASCE 7-98
  • Author : Kishor C. Mehta,Dale C. Perry
  • Publisher : Amer Society of Civil Engineers
  • Pages : 132
  • Relase : 2002
  • ISBN : 0784405336

Guide to the Use of Wind Load Provisions of ASCE 7-98 Book Review:

"Guide to the Use of the Wind Load Provisions of ASCE 7-98 will assist structural engineers who design buildings and structures following the wind load provisions."--BOOK JACKET.